Zibro Heaters LCSL530 NF Approved Laser Paraffin Heater 4.65kW

 

4 year warranty ecor proLaser Zibro Heaters LCSL530
Used for the whole home
Or supplemental heater for Energy Efficiency
Laser Burner Highly Efficient

  • NF Approved
  • 4.65kW Heat Output
  • CO2 Sensor
  • Very quiet in operation
  • 24 hour operation with programmable timer
  • Motion sensor to provide more heat when people are near to save fuel
  • Cool Top Technology so top surface is safe to touch
  • Parental Control Setting
  • LCD Display
  • Remote Control
  • Built in fan to circulate air
  • Economical “Save Mode”
  • Tip over switch to avoid spilling of fuel
  • Power failure safety cut out
  • Overheat protector
  • Japanese built
  • 4 year Warranty
SKU: LCSL530. Category: . Tag: .

Description

Zibro Heaters LCSL530 NF Approved Laser Paraffin Heater 4.65kW Zibro Branded

WICKLESS DESIGN: Provides clean and economical heat without wick maintenance or replacement. Heating rooms up to 190m3

SAFETY DEVICE: The zibro heater is equipped with a Tip-over Switch, Ignition Safety Device, Burning Control Device, Safety Device for Power Outage, High Limit Switch (Overheat Protector), Incomplete Combustion Preventive Device (Flame Rod, Burner Thermistor).

SAVE MODE: In addition to the existing 5 cycle burning mode, also a burning stop-operation is available to prevent overheating the room.

COOL TOP CABINET: Prevents accidental contact burns.

BUILT-IN FAN: Circulates a clean, cosy, even warmth throughout the room.

INFORMATION MONITOR: An information monitor allows you to keep track of all important heater functions including the weekly timer.

SEMI-AUTOMATIC OPERATION: Features a 24-hour programmable timer and an integrated thermostat controller to maintain the desired room temperature. It offers 5 cycle burning mode (High  Med-High  Med  Med-Low  Low).

MOTION DETECTOR SENSOR: This sensor signals every single movement in a room. The sensor detects movements as far as 7 meter. If the sensor does not detect movements for 10 minutes then the heater will automatically switch to a lower combustion level. As a result less fuel will be used.

BACK UP SYSTEM: In case of a power failure the heater will be switched off. To retain the memory settings, the power has to be restored within approximately 10 minutes.

PARENTAL CONTROL: When this button is pressed, the operation of buttons will be blocked, except the on/off button.

REMOTE CONTROL: The heater is provides with an ‘easy to use’ remote control to activate the main functions of the heater.

LC-SL530
Laser Paraffin Heater
 LC-SL530
Laser Paraffin Heater
 
Product Dimensions (Packaged Dimensions)
W X D X H (mm)
550 x 328 x 445
(600 x 360 x 500)
Current (A)0.1
Weight (Kg)
Nett / Gross
13.5 / 14.5Mains voltage & frequency (V)/(Hz)230/50
User Guide Available NL/FR/D/GBPower (W)
Preheating / Burning
320 / 23
CertificationNF / GS / CE / RoHs / EMCIP RatingIP21
Items IncludedUser ManualFuel Consumption (L/Hr)0.151-0.484
Items IncludedManual Fuel PumpFuel TypeKerosene (Paraffin) Premium
Items IncludedRemote ControlNoise Level (dB(A))26-38
Burn Time per Tank (Hr)15.7-50Pallet Qty EU 16 (4 x 4)
Suitable for Room Area (m2)30-75Bar Code4963505722470
Suitable for Room Volume (m3)75-190ManufacturerToyotomi
Tank Capacity (L)7.6BrandToyotomi
Burner TypeForced draft, unvented, pot (forced convection type) OEM OptionNo
Output (kW)1.45-4.65Country of OriginJapan

Reviews

There are no reviews yet.

Be the first to review “Zibro Heaters LCSL530 NF Approved Laser Paraffin Heater 4.65kW”

Your email address will not be published. Required fields are marked *