Zibro Heaters LCDX320 NF Approved Laser Paraffin 3.1kW
Laser Zibro Heaters LCDX320
Used for the whole home
Or supplemental heater for Energy Efficiency
Laser Burner Highly Efficient .
- CE & NF Approved
- 3.1kW Heat Output
- CO2 Sensor
- Very quiet in operation
- LCD Display
- Built in fan to circulate air
- Economical “Save Mode”
- Tip over switch to avoid spilling of fuel
- Power failure safety cut out
- Overheat protector
- Japanese built
- 4 year Warranty
Zibro Heaters LCDX320 NF Approved Laser Paraffin 3.1kW Zibro Branded
WICKLESS DESIGN ; without installation, flue less space heater. This heater can heat up a volume up to 120 m³, which makes it an ideal, highly efficient and economical space heater.
Semi – automatic operation : Features a 24-hour programmable timer and integrated thermostat controller to maintain desired room temperature. It offers 5 cycle burning mode (High – Med High – Med – Med Low – Low)
Information monitor / Display / Week timer: The LCD display allows you to monitor and keep track of all important heater functions.
Automatic cleaning mode: Once the heater has run 2 hours consecutively, the automatic cleaning mode will start to clean the combustion chamber of the burner for 5 minutes.
Removable fuel tank : The heater is provided with a removable fuel tank with a capacity of 7.6 litres.
Safety device : The heater is equipped with a tip over switch, ignition safety device, burning control device, safety device for power outage, High limit switch / overheat protector, Flame rod / Burner thermistor for incomplete combustion. On top this heater is provided with a built in CO2 sensor, which will measure the CO2 level in the room, not exceeding 1 % otherwise heater will shut off automatically, to have the room ventilated first.
New SAVE mode: this system will permit the user to maintain the set temperature in the room without considerable variation. This system saves up to 8 % of fuel consumption. Also it will serve as an anti-freeze setting in colder places.
Extension operation mode: When the fuel tank is almost empty, the display will show that the tank has to be refilled within 10 minutes. By activating the extension operation mode, the time to refill can be extended to approximately 60 minutes.
Booster mode: during start up / ignition of the heater and in case room temperature is 5 degrees C lower than the set temperature, the heater will give 10 % more power during the first 5 minutes after ignition, in order to obtain de set temperature more rapidly.
Parental control : When this button is pressed, the operation of buttons will be blocked, except the ON/OFF button
Fuzzy Logic: This heater is equipped with a self – regulating temperature control system.The heating mode can be set according to the requirements. The built in fan circulates a clean, cosy, even warmth throughout the room, through its silent fan (23 – 38 dB)
Laser Paraffin Heater
Laser Paraffin Heater
|Product Dimensions (Packaged Dimensions) |
W X D X H (mm)
|376 x 296 x 428|
(428 x 340 x 485)
Nett / Gross
|8 / 10||Mains voltage & frequency (V)/(Hz)||230/50
|User Guide Available||NL/FR/DE/EN/SP/IT|
Preheating / Burning
|320 / 13|
|Certification||NF / CE / RoHs / EMC||IP Rating||IP21|
|Items Included||User Manual||Fuel Consumption (L/Hr)|
In weight (g/Hr)
|Items Included||Manual Fuel Pump||Fuel Type||Kerosene (Paraffin) Premium|
|Items Included||Transport Cap||Noise Level (dB(A))||18-35|
|Burn Time per Tank (Hr)||16.2-65.0||Pallet Qty EU||4 x 6 = 24 pcs|
|Suitable for Room Area (m2)||20-48||Bar Code||4963505722487|
|Suitable for Room Volume (m3)||50-120||Manufacturer||Toyotomi|
|Tank Capacity (L)||5.4||Brand||Zibro|
|Burner Type||Pot type, forced convection||OEM Option||No|
|Output (kW)||0.8-3.1||Country of Origin||Japan|