Zibro Heaters LC320 NF Approved Laser Paraffin 3.2kW


4 year warranty ecor proLaser Zibro Heaters LC320
Used for the whole home
Or supplemental heater for Energy Efficiency
Laser Burner Highly Efficient

  • CE & NF Approved
  • 3.2kW Heat Output
  • CO2 Sensor
  • Very quiet in operation
  • 24 hour operation with programmable timer
  • Parental Control Setting
  • LCD Display
  • Built in fan to circulate air
  • Economical “Save Mode”
  • Tip over switch to avoid spilling of fuel
  • Power failure safety cut out
  • Overheat protector
  • Japanese built
  • 4 year Warranty
SKU: LC320. Category: . Tag: .


Zibro Heaters LC320 NF Approved Laser Paraffin 3.2kW

NF APPROVED: Made to the highest French safety standards with genuine Swedish made CO2 sensor.

WICKLESS DESIGN; without installation, flueless space heater. These Zibro paraffin heaters can heat up a volume up to 120m³, which makes it an ideal, highly efficient and economical space heater.

SEMI-AUTOMATIC OPERATION: Features a 24-hour programmable timer and integrated thermostat controller to maintain desired room temperature. It offers 5 cycle burning mode (High <=> Med-High <=> Med <=> Med-Low <=> Low)

SAFETY DEVICE: The heater is equipped with a tip over switch, ignition safety device, burning control device, safety device for power outage, high limit switch / overheat protector, flame rod / burner thermistor for incomplete combustion.

REMOVABLE FUEL TANK: The heater is provided with a removable fuel tank with a capacity of 5.4 liters, which will ensure a burning time of max. 65 hours.

BUILT IN FAN: circulates a clean, cozy, even warmth throughout the room, through its silent fan (18-35 dB)

EXTENSION OPERATION MODE: When the fuel tank is almost empty, the display will show that the tank has to be refilled within 10 minutes. By activating the extension operation mode, the time to refill can be extended to approximately 60 minutes.

SAVE – MODE: In addition to the existing 5-cycle burning mode, also a “burning –stop” operation is available, which allows you to maintain the set temperature in the room. This feature saves up to 8 % on the energy consumption.

AUTOMATIC AIR FLOW CONTROL: The speed of the built in fan is self regulatory, depending on the burning mode of the heater.

INFORMATION MONITOR / DISPLAY: The display allows you to monitor and keep track of all important heater functions.

PARENTAL CONTROL: When this button is pressed, the operation of buttons will be blocked, except the ON/OFF button

FUZZY LOGIC: This heater is equipped with a self – regulating temperature controle system.The heating mode can be set according to the requirements.

MADE IN JAPAN: Manufactured according to ISO 9000 :2000 standards in Japan

Laser Paraffin Heater
Laser Paraffin Heater
Product Dimensions (Packaged Dimensions)
W X D X H (mm)
376 x 296 x 428
(428 x 340 x 485)
Current (A)0.1
Weight (Kg)
Nett / Gross
8 / 10Mains voltage & frequency (V)/(Hz)230/50
User Guide Available NL/FR/DE/EN/SP/ITPower (W)
Preheating / Burning
320 / 13
CertificationNF / CE / RoHs / EMCIP RatingIP21
Items IncludedUser ManualFuel Consumption (L/Hr)
In weight (g/Hr)
Items IncludedManual Fuel PumpFuel TypeKerosene (Paraffin) Premium
Items IncludedTransport CapNoise Level (dB(A))18-35
Burn Time per Tank (Hr)16.2-65.0Pallet Qty EU 4 x 6 = 24 pcs
Suitable for Room Area (m2)19-48Bar Code4963505722852
Suitable for Room Volume (m3)50-120ManufacturerToyotomi
Tank Capacity (L)5.4BrandZibro
Burner TypePot type, forced convectionOEM OptionNo
Output (kW)0.8-3.1Country of OriginJapan


There are no reviews yet.

Be the first to review “Zibro Heaters LC320 NF Approved Laser Paraffin 3.2kW”

Your email address will not be published. Required fields are marked *