Zibro Heaters LC32 Laser Paraffin 3.2kW
Laser Zibro Heater
Used for the whole home
Or supplemental heater for Energy Efficiency
Laser Burner Highly Efficient
- Laser Burner Highly Efficient from 0.8 – 3.2kW
- Very quiet in operation only 23dB
- 24 hour operation with programmable timer
- Parental Control Setting Child Lock
- LCD Display with Weekly Timer Fuzzy Logic Controlled
- Built in fan to circulate air
- 5.4 Liter Tank Minimum
- Burn Time 16.2 Hours (Maximum 64 Hours)
- Economical “Save Mode” & Tilt Safety
- Clean Grip System & Extension Mode
- New Safe Mode
- Clean Burner Mode
- Booster Start
- Safety Stop
- Tip over switch to avoid spilling of fuel
- Power failure safety cut out
- Overheat protector
- Japanese built
- 4 year Warranty
- Branded Zibro made by Toyotomi makers of Zibro Heaters
Zibro Heaters LC32 Laser Paraffin 3.2kW Zibro branded
WICKLESS DESIGN; without installation, flue-less space heater. These Zibro heaters can heat up a volume up to 120 m³, which makes it an ideal, highly efficient and economical space heater.
SEMI-AUTOMATIC OPERATION: Features a 24-hour programmable timer and integrated thermostat controller to maintain desired room temperature. It offers 5 cycle burning mode (High <=> Med-High <=> Med <=> Med-Low <=> Low)
SAFETY DEVICE: The heater is equipped with a tip over switch, ignition safety device, burning control device, safety device for power outage, high limit switch / overheat protector, flame rod / burner thermistor for incomplete combustion.
REMOVABLE FUEL TANK: The heater is provided with a removable fuel tank with a capacity of 5.4 litres, which will ensure a burning time of max. 65 hours.
BUILT IN FAN: circulates a clean, cosy, even warmth throughout the room, through its silent fan (18-35 dB)
EXTENSION OPERATION MODE: When the fuel tank is almost empty, the display will show that the tank has to be refilled within 10 minutes. By activating the extension operation mode, the time to refill can be extended to approximately 60 minutes.
SAVE – MODE: In addition to the existing 5-cycle burning mode, also a “burning –stop” operation is available, which allows you to maintain the set temperature in the room. This feature saves up to 8 % on the energy consumption.
AUTOMATIC AIR FLOW CONTROL: The speed of the built in fan is self regulatory, depending on the burning mode of the heater.
INFORMATION MONITOR / DISPLAY: The display allows you to monitor and keep track of all important heater functions.
PARENTAL CONTROL: When this button is pressed, the operation of buttons will be blocked, except the ON/OFF button
FUZZY LOGIC: This heater is equipped with a self – regulating temperature controller system.The heating mode can be set according to the requirements.
Laser Paraffin Heater
Laser Paraffin Heater
|Product Dimensions (Packaged Dimensions) |
W X D X H (mm)
|376 x 296 x 428|
(428 x 340 x 485)
Nett / Gross
|8 / 10||Mains voltage & frequency (V)/(Hz)||230/50
|User Guide Available||NL/FR/DE/EN/SP/IT||Power (W)|
Preheating / Burning
|320 / 13|
|Certification||CE / RoHs / EMC||IP Rating||IP21|
|Items Included||User Manual||Fuel Consumption (L/Hr)|
In weight (g/Hr)
|Items Included||Manual Fuel Pump||Fuel Type||Kerosene (Paraffin) Premium|
|Items Included||Transport Cap||Noise Level (dB(A))||18-35|
|Burn Time per Tank (Hr)||16.2-65.0||Pallet Qty EU||4 x 6 = 24 pcs|
|Suitable for Room Area (m2)||19-48||Bar Code||4963505722845|
|Suitable for Room Volume (m3)||50-120||Manufacturer||Toyotomi|
|Tank Capacity (L)||5.4||Brand||Zibro|
|Burner Type||Pot type, forced convection||OEM Option||No|
|Output (kW)||0.8-3.2||Country of Origin||Japan|